IBM Sterling Control Center: Configuração do SCC Monitor
Configurando o IBM Sterling Control Center
Execute o Configuration Manager:
iccuser$ ./configCC.sh
O script verifica o ambiente
Checking required operating system libraries for Reports Server(Cognos)...
Linux Distribution : REDHAT
OS bit : 64
Redhat Version : 7.8.2003
...
...
Checking required libraries on Redhat 7...
Checking for glibc-2.17-55.el7 i686 library package...
Found glibc-2.17-307.el7.1-i686 library package...
...
...
Configuration Directory is '/home/iccuser/IBM/CC6.1.3/conf'
--------------------------------------------------------------------
IBM Control Center Version : 6.1.3.0 - build February 28 2020 06:59
For detailed IBM Control Center system requirements, go to the following URL:
http://www-01.ibm.com/support/docview.wss?uid=swg27036103
--------------------------------------------------------------------
Checking ulimit setting for user iccuser.....
User iccuser has the appropriate ulimit settings needed to start the Cognos.
...
...
--------------------------------------------------------------------
Config step : Keystore / truststore configuration ...
Warning: Specify a valid keystore.(See the documentation to build one)
Otherwise the secure connectors may not start.
--------------------------------------------------------------------
Do you want to configure the keystore and truststore files? (Y/N)Y
Are you sure about your selection? (Y/N)Y
Vamos configurar o Keystone e trustorer
Keystore and truststore configuration ... Provide the path to your java keystore file [../conf/security/CCenter.keystore] : Please provide password to the keystore (at least 6 chars, no blanks) : Re-enter Password : Provide the path to your trust store file [../jre/lib/security/cacerts] : You provided the following value(s) Keystore file path : ../conf/security/CCenter.keystore Keystore password : ******** Truststore file path (optional): ../jre/lib/security/cacerts You are using the default truststore password. Are the values that were entered correct? (Y/N) [Y] -------------------------------------------------------------------- Config step : JDBC driver files installation ... For detailed IBM Control Center system requirements, go to the following URL: http://www-01.ibm.com/support/docview.wss?uid=swg27036103 -------------------------------------------------------------------- Provide the following database parameters... Provide a database type (DB2 or DB2zOS or Oracle or MSSQL)[DB2] : The specified file does not exist ... Provide the full path to db2jcc.jar or db2jcc4.jar including the file name) : /home/iccuser/IBM/db2jcc4.jar JDBC Driver Class Name : com.ibm.db2.jcc.DB2Driver Major Version : 4 Minor Version: 24 You provided the following parameters: Database type = DB2 You provided JDBC driver file(s) /home/iccuser/IBM/db2jcc4.jar /home/iccuser/IBM/db2jcc_license_cu.jar Are the values that were entered correct? (Y/N) [Y] JDBC Driver file(s) installation... Successful -------------------------------------------------------------------- Config step : Database connection parameters configuration ... For detailed IBM Control Center system requirements, go to the following URL: http://www-01.ibm.com/support/docview.wss?uid=swg27036103 -------------------------------------------------------------------- Provide the following database connection parameters... Do you want to configure a secure connection to your database? (Y/N) [N] : Provide the database host name [127.0.0.1] : iccdb.test.net Provide the database port number [50000] : 50000 Provide the database user name [] : db2inst1 Database Password (no blanks): Re-enter Database Password : Provide the database name [] : SCCPRD You provided the following database connection parameters: Database type = DB2 Secure connection to database = N Database host name = iccdb.test.net Database port = 50000 Database user name = db2inst1 Database password = ******** Database name = SCCPRD Are the values that were entered correct? (Y/N) [Y] No Root pass phrase found in DB and so generating a new one. The SMTP server configuration for IBM Control Center was not completed in this installation location, and no SMTP configuration is in the database. The report server (Cognos) configuration for IBM Control Center was not completed in this installation location, and no report server configuration is in the database. DB Scripts Directory is '/home/iccuser/IBM/CC6.1.3/db' Registering hostname verifier ... MBEAN_INVOKE_TIMEOUT_SECONDS set to 10 Launch Mode:console Verifying required tables on the target DB server for JDBCService ... DB Connection parms configuration ... Successful DB Scripts Directory is '/home/iccuser/IBM/CC6.1.3/db' -------------------------------------------------------------------- Config step : Installing root passphrase ... -------------------------------------------------------------------- Root Passphrase already exists for this installation -------------------------------------------------------------------- Config step : Database initialization ... -------------------------------------------------------------------- DB Scripts Directory is '/home/iccuser/IBM/CC6.1.3/db' Checking if any other event processor (engine) is running and using this database... No other event processor (engine) is currently using this database. Executing script '/home/iccuser/IBM/CC6.1.3/db/drop_tables.sql' ... ...................................................... Executing script '/home/iccuser/IBM/CC6.1.3/db/create_tables.sql' ... ..................................... Executing script '/home/iccuser/IBM/CC6.1.3/db/create_configCC_tables.sql' ... .............................................................. Executing script '/home/iccuser/IBM/CC6.1.3/db/create_configCC_indexes.sql' ... ................. Executing script '/home/iccuser/IBM/CC6.1.3/db/create_views.sql' ... ......... Executing script '/home/iccuser/IBM/CC6.1.3/db/create_db2_indexes.sql' ... .............................................................................. Executing script '/home/iccuser/IBM/CC6.1.3/db/add_data.sql' ... Executing script '/home/iccuser/IBM/CC6.1.3/db/add_data_db2.sql' ... . Executing script '/home/iccuser/IBM/CC6.1.3/db/add_typeData.sql' ... ............................... Executing script '/home/iccuser/IBM/CC6.1.3/db/cc_db2_fixes.sql' ... Executing script '/home/iccuser/IBM/CC6.1.3/db/cc_configCC_db2_fixes.sql' ... Do you want to partition your database tables? (Y/N)Y Are you sure about your selection? (Y/N)Y Converting tables to partitions...it may take a while...please be patient. Starting partitioning conversion of table: EVENTS End of partitioning conversion of table: EVENTS Starting partitioning conversion of table: CD_STATS_LOG End of partitioning conversion of table: CD_STATS_LOG Starting partitioning conversion of table: CE_STATS_LOG End of partitioning conversion of table: CE_STATS_LOG Starting partitioning conversion of table: CX_STATS_LOG End of partitioning conversion of table: CX_STATS_LOG Starting partitioning conversion of table: QF_STATS_LOG End of partitioning conversion of table: QF_STATS_LOG Starting partitioning conversion of table: MQ_STATS_LOG End of partitioning conversion of table: MQ_STATS_LOG Starting partitioning conversion of table: AF_STATS_LOG End of partitioning conversion of table: AF_STATS_LOG Starting partitioning conversion of table: BP_STATS_LOG End of partitioning conversion of table: BP_STATS_LOG Starting partitioning conversion of table: FG_STATS_LOG End of partitioning conversion of table: FG_STATS_LOG Starting partitioning conversion of table: EVENT_COMMENTS End of partitioning conversion of table: EVENT_COMMENTS Starting partitioning conversion of table: AUDIT_LOG End of partitioning conversion of table: AUDIT_LOG Starting partitioning conversion of table: EVENTS_EXT End of partitioning conversion of table: EVENTS_EXT Starting partitioning conversion of table: CC_ALERT End of partitioning conversion of table: CC_ALERT Partition conversion done. DB initialization - Successful -------------------------------------------------------------------- Config step : Administration User configuration... -------------------------------------------------------------------- Admin user password must be set. Enter Admin user password (no blanks): Re-enter Admin user password : You provided the following values: Admin user password = *********** Admin user password has been set. -------------------------------------------------------------------- Config step : Creating the pre-defined JMS user ... -------------------------------------------------------------------- -------------------------------------------------------------------- Config step : Event processor (engine) name configuration ... -------------------------------------------------------------------- Provide a 10 character Event Processor (engine) name [CCenter] : You provided the following Event Processor (engine) name : Event Processor (engine) name is 'CCenter' Are the values that were entered correct? (Y/N) [Y] Event Processor (engine) name has been successfully configured ... -------------------------------------------------------------------- Config step : Engine time zone configuration ... -------------------------------------------------------------------- Default Time Zone : (UTC+01:00) Lisbon, London 1. (UTC+01:00) Lisbon, London 2. (UTC+01:00) Casablanca, Monrovia 3. (UTC+01:00) West Central Africa 4. (UTC+01:00) Dublin, Edinburgh You chose the following time zone for the IBM Control Center event processor (engine): 1. (UTC+01:00) Lisbon, London Are the values that were entered correct? (Y/N) [Y] Engine Time Zone has been successfully configured ... -------------------------------------------------------------------- Config step : HTTP connector configuration (connection between event processor (engine) and the console)... -------------------------------------------------------------------- HTTP connector configuration ... Provide a port number. (Enter 0 to disable the HTTP) [58080] : Provide a listening address for the above port. [0.0.0.0](0.0.0.0- to listen on all addresses): You provided the following values: Port number = 58080 Listening address for port = 0.0.0.0 Are the values that were entered correct? (Y/N) [Y] -------------------------------------------------------------------- Config step : Secure HTTP connector configuration (connection between Engine and the console)... Note: A valid keystore is needed for the secure connection. -------------------------------------------------------------------- Do you want to configure the secure HTTP connector? (Y/N) Do you want to configure the secure HTTP connector? (Y/N)Y Are you sure about your selection? (Y/N)Y Secure HTTP connector configuration ... Provide a port number.(Enter 0 to disable the HTTPS) [58081] : Provide a listening address for the port. [0.0.0.0](0.0.0.0- to listen on all addresses): You provided the following values: Port number = 58081 Listening address for port = 0.0.0.0 Are the values that were entered correct? (Y/N) [Y] -------------------------------------------------------------------- Config step : Java WebSphere Application server(WebSphere Liberty Profile) configuration... (This step is required for web client and launch page access.) Note: A valid keystore is needed for the secure connection. -------------------------------------------------------------------- WebSphere Application server configuration ... Provide a port number. (Enter 0 to disable) [58082] : Provide a secure port number. (Enter 0 to disable) [0] : 58083 *************************** Warning *************************** Both the secure and non-secure ports are enabled, therefore the HTTPS Strict-Transport-Security header and the cookieSecure flag, which both provide enhanced security are not going to be set for secure connections. Do you want to continue with the WebSphere Application server configuration? (Y/N) [N]Y Provide the host name of the event processor (engine). [sinode01.test.net] : Provide a listening address for the above port. [0.0.0.0](0.0.0.0- to listen on all addresses): Do you want the WebSphere Application server to automatically stop when the IBM Control Center event processor (engine) stops? (Y/N)[Y] : You provided the following values: WebSphere Application server port = 58082 WebSphere Application server secure port = 58083 Event processor (engine) host name = sinode01.test.net Listening address for port = 0.0.0.0 Automatically stop the web application server when the event processor (engine) is stopped = Y HTTPS Strict-Transport-Security header and secureCookie attribute will not not in use. Are the values that were entered correct? (Y/N) [Y]N WebSphere Application server configuration ... Provide a port number. (Enter 0 to disable) [58082] : Provide a secure port number. (Enter 0 to disable) [0] : 58083 *************************** Warning *************************** Both the secure and non-secure ports are enabled, therefore the HTTPS Strict-Transport-Security header and the cookieSecure flag, which both provide enhanced security are not going to be set for secure connections. Do you want to continue with the WebSphere Application server configuration? (Y/N) [N]Y Provide the host name of the event processor (engine). [sinode01.test.net] : iccnode01.test.net Provide a listening address for the above port. [0.0.0.0](0.0.0.0- to listen on all addresses): Do you want the WebSphere Application server to automatically stop when the IBM Control Center event processor (engine) stops? (Y/N)[Y] : You provided the following values: WebSphere Application server port = 58082 WebSphere Application server secure port = 58083 Event processor (engine) host name = iccnode01.test.net Listening address for port = 0.0.0.0 Automatically stop the web application server when the event processor (engine) is stopped = Y HTTPS Strict-Transport-Security header and secureCookie attribute will not not in use. Are the values that were entered correct? (Y/N) [Y] -------------------------------------------------------------------- Config step : Event repository configuration ... -------------------------------------------------------------------- Do you want to enable authentication for the Event Repository? (Y/N) [N] : Y Are you sure about your selection? (Y/N)Y -------------------------------------------------------------------- Config step : Email (SMTP) server configuration ... -------------------------------------------------------------------- To receive an email notification that is generated by an action in IBM Control Center, you must provide the email server configuration details and the IBM Control Center administrator's email address. Email host name? [localhost] : smtp.test.net Email port number? [25] : Email user name? Enter dot (.) for none. [] : ICCAdmin Enter user password (no blanks). Enter dot (.) for none. Re-Enter user password (no blanks). Enter dot (.) for none. Email from address? [noone@anywhere] : [email protected] Administrator email address? [noone@anywhere] : [email protected] You provided the following email configuration options: Email host name = smtp.test.net Email port number = 25 Email user name = ICCAdmin Email password = ******** Email from address = [email protected] IBM Control Center administrator email address = [email protected] Are the values that were entered correct? (Y/N) [Y] -------------------------------------------------------------------- Config step : Cognos dispatcher (report server) configuration ... -------------------------------------------------------------------- Cognos configuration ... Provide the database host name for Cognos. [iccdb.test.net] : Provide the database port number for Cognos. [50000] : Provide the database name for Cognos. [SCCPRD] : SCCRPT Provide the database user ID for Cognos: [db2inst1] : Enter Cognos database password (no blanks) : Re-Enter Cognos database password (no blanks) : Provide the Cognos port number: [58085] : (From port 58085 to port 58098 is going to be used for the report server (Cognos) in IBM Control Center.) Do you want to automatically start Cognos? (Y/N)[Y] : You provided the following information : Cognos database host name = iccdb.test.net Cognos database port = 50000 Cognos name = SCCRPT Cognos database user ID = db2inst1 Cognos database password = ******** Cognos dispatcher port = 58085 Cognos dispatcher host from Java WebSphere Application server configuration step = iccnode01.test.net Cognos automatic start = true Are the values that were entered correct? (Y/N) [Y] Checking if any other engine is running and using this database... Number of engines/event processors registered in database : 1 Waiting for 10 seconds to get status update from all engines/event processors... Updating reports server configuration... Saving report server configuration changes ... Done Report Server(Cognos) configuration done! -------------------------------------------------------------------- Config step : JMS configuration ... -------------------------------------------------------------------- Do you want to enable JMS events? (Y/N) [n] : Are you sure about your selection? (Y/N)Y JMS successfully configured ... The IBM Control Center event processor (engine) configuration is complete. Updating permissions for encryption key files... Updating permissions for encryption key files...Done!